Taxes calculated at checkout.

The PSDR Wave Hanger can accommodate cabinet doors with hinge holes up to 36" apart. They are custom-fit to the size of the ProDryingRack SD (PSDR) Series poles for minimum swing, allowing you to hang cabinet doors and parts closer together. The PSDR's 18 feet of drying line is enough space for drying up to 50 cabinet doors.

The PSDR Series with EFC Hinge Hooks provides perfect and completely unmarred surface results. EFC's are placed in the cup holes and then fit over one of PaintLine's hangers for "all-sides" spraying and drying. Cup-hooks can also be screwed into the tops and bottoms of cabinet doors to be hung and sprayed.

After painting on the spinner assembly, the door on the hanger is simply transferred over to the drying line where it will hang until ready for door hardware and installation.

• Quantity: 20 Wave Hangers
• Material: Steel
• Color: Silver
• Purchase does not include a carry bag
  

  Shipping & Assembly

 

Taxes calculated at checkout.

These heavy-duty metal hangers eliminate the annoying and costly failure of wooden clothes hangers. They are custom-fit to the size of the ProDryingRack SD (PSDR) Series poles for minimum swing, allowing you to hang cabinet doors and parts closer together. The PSDR's 18 feet of drying line is enough space for drying up to 50 cabinet doors.

The PSDR Series with EFC Hinge Hooks provides perfect and completely unmarred surface results. EFC's are placed in the cup holes and then fit over one of PaintLine's hangers for "all-sides" spraying and drying. Cup-hooks can also be screwed into the tops and bottoms of cabinet doors to be hung and sprayed.

After painting on the spinner assembly, the door on the hanger is simply transferred over to the drying line where it will hang until ready for door hardware and installation.

• Quantity: 50 Standard Hangers
• Material: Powder-coated steel
• Color: Orange

Shipping & Assembly

Taxes calculated at checkout.

The 2nd Tier Connectors allow better use of your vertical drying space of the PSDR Series for small parts. Why should drawer fronts for small cabinets consume as much drying space as a 36” cabinet? Well they shouldn’t, and with this add-on they don't! The 2nd Tier Connectors let you turn one level of drying space into two. An absolute must if you’re opting for the EFC Hinge Hooks and Wave Hangers.

The 2nd Tier Connectors consist of 4 double-pronged couplers: one pair slides over the 66” vertical drying poles and is secured by a thumb screw to the desired height or spacing; the second pair goes on the top of the drying pole to keep proper spacing of the horizontal poles.

As with all of the PSDR Series, there are no tools required for assembly and this can go inline with an existing drying run.  

All 4 parts are bright blue to show that they work together and eliminate confusion.

• Quantity: Set of 2 pairs (4 pieces total)
  
• Material: Powder-coated steel
• Color: Cyan

Shipping & Assembly    

Taxes calculated at checkout.

All new PSDR Spinner+! Users can now choose to rotate the spinner by the metal edge, or insert wooden dowels for arms-length control. Redesigned to more securely balance the hanger and help prevent tilting.

The Spinner+ can accommodate wooden dowels with a 0.5" diameter and maximum length of 18". Purchase does not include wooden dowels.

• Quantity: 1 PSDR Spinner
  
• Material: Powder-coated steel
• Color: Orange
• Purchase does not include wooden dowels

Shipping & Assembly

Taxes calculated at checkout.

Replacement Double Joint Connectors to be used with the ProDryingRack SD (PSDR) Series. These Connectors fit in the top of a vertical PSDR pole, then two horizontal poles connect to either or both sides of the pegs for up to 12 feet of drying line.

• Quantity: Set of 4 (4 pieces total)
  
• Material: Powder-coated steel
• Color: Orange

Shipping & Assembly

Taxes calculated at checkout.

All new Hinge Hooks (Set of 100) utilize a proprietary design that uses a single, high carbon steel wire to reduce shadowing from the spray pattern on the cabinet door. Manufactured by one of the largest fish hook factories in the world, the razor sharp point of the hook provides added security when holding the cabinet door for spraying and moving to the drying area. PaintLine Hinge Hooks are a significant improvement over standard EFC hooks.

Users can choose either the Standard Hangers, which can accommodate hinge holes up to 15” apart, or the Wave Hangers, which can accommodate cabinet doors with hinge holes up to 36” apart. Both styles of hangers are custom-fit to minimize swing and to allow for tight spacing.

• Quantity: Set of 100
• Material: High Carbon Steel
• Capacity: 25lb each or 50lb per set of 2 
• Color: Silver
• Other: Comes with a reusable plastic storage container.

WARNING: Sharp tip represents a potential puncture hazard.  Handle with extreme caution. Keep away from children.

 Shipping & Assembly

Taxes calculated at checkout.

Expand your ProDryingRack SD (PSDR) Series with additional bases.

• Quantity: 4 bases with 4 thumb screws
• Material: Powder-coated steel
• Color: White
• Purchase does not include a carry bag
  

Shipping & Assembly